Master LED Meter breakout

First draft of this shit



Does what it says on the tin. GND plane on the bottom in blue, red is signal traces on the top.



Technically it can be done on one side, but to play it safe... double side it.



1.20"x1.30"(1.60" with headers) (0.1" spacings)

Funk The Matrix : Case Design

Yeah I've probably gone wildly over on depth, but the PCBs stack vertically behind one another.

Funk The Matrix : All Analogue Pattern Sequencer

Control-board and test faceplate, component details to follow. As you can see the slide-switches don't come up as high as the bush-mount on the rotary-switches, any suggestions East on some risers or something?

The 'Wickaloscillator' - John's homebrew synthesizer

1 multi-wave oscillator with a filter and LFO. He assures me an ADSR envelope generator is on the way!

East's homebrew MIDI controller - [Arduino based]

Using an Arduino Uno serial to USB interface, a few tactile buttons, LEDs and a rotary pot.

Arduino chip now flashed to send true MIDI.

LED meter-bridge test.